Samsung NP915S3G-K01US Using the TPM Security Device Optional, Installing the TPM program, Method

Using the TPM Security Device (Optional)

Chapter 3. 77

Using the computer

5

6

When the system reboots, press the corresponding key(s) by following the onscreen instructions.

When the computer restarts automatically and the Samsung logo screen appears, press the F2 key repeatedly.

Installing the TPM program

You can install the TPM program as follows. Install the program according to the procedures below.

7	Select the Security > TPM Configuration > Change TPM
	Status item and set the item to Enable and Activate.

TPM Device	Enabled
TPM State	Clear
Security Chip State	Enabled & Activate
	Clear
	Enabled & Activate
	Deactivate & Disable

Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.

8 Press the F10 key to save the changes.

9 When the system reboots, press the corresponding key(s) by following the onscreen instructions.

10Press the F10 key to save the changes. The computer automatically restarts. Initialization of the TPM chip has been completed. Now, install the TPM program and register the TPM program.

This program is only provided for models with Recovery and the TPM function.

Method 1

1 Run Recovery and click on System Software.

-If your computer does not boot up or if System Software does not display in the Recovery program, use Method 2 to install the TPM program.

2	Click on System Software Installation.
3	The SW Update program will be launched.
	Select TPM Host SW and click Install Now.
	If the system software media is supplied with the product,
	you can install the program by using the system software
	media (only when supplied.)
4	After the installation, if you click OK, the computer restarts.