CONNECTING TO THE MAINS POWER SUPPLY
Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob.
Shut off power to circuit before connecting wires to WARNING circuit.
The heating element voltage is AC 230 V~. The appliance also works perfectly on networks with AC 220 V~ or AC 240 V~. The hob is to be connected to the mains using a device that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm, eg. automatic line protecting cut - out, earth leakage trips or fuse.
The cable connections must be made in accordance with WARNING regulations and the terminal screws tightened securely.
Once the hob is connected to the mains supply, check that all WARNING cooking zones are ready for use by briefly switching each on
When the hob is powered on for the first time, all displays light and the child safety lock is activated.
Pay attention (conformity) to phase and neutral allocation WARNING of house connection and appliance (connection schemes);
WARNING manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
English - 11
HOB THE INSTALLING 03