cooking zone. 
will appear in the timer display.
The next active cooking zone is selected by touching the Timer control 
sensor again.
2. Use the Timer setting selectors (
or 
) to set the desired amount of time, for example, 15 minutes, after which the cooking zone will automatically switch itself off. Thesafety shutoff is now activated.
To display the time remaining for any of the cooking zones, use the Timer control 
sensor.
The corresponding control indicator will begin to blink slowly. The settings are reset using the Timer setting selectors (
or 
). After the set period of time has elapsed, the cooking zone automatically switches itself off, an acoustic signal sounds as confirmation and the timer display indicates.
To change the settings quicker, touch any of the 
or 
control sensors until the desired value is reached.
If the 
control sensor is touched first, the time setting will begin at 99 minutes; if the 
control sensor is touched first, the time setting will begin at 1 minute.
Countdown timer
For the countdown timer to be used, the appliance must be switched on but all the cooking zones must be switched off.
1.Touch the Timer control 
sensor. 
will appear in the timer display.
2.Set the desired period of
time using the right rear
cooking zone’s Timer setting selectors (
or 
).
The countdown timer function is now activated and the
remaining time appears in the timer display.
To cancel the remaining time, touch the Timer control 
sensor.
26_English
05/03/2014 11:27:08
