MagicInfo, ID Setup, ID Input, MDC Connection | Samsung OL46B

Adjusting the LCD Display

•ID Setup

Assigns distinctive IDs to the SET.

•ID Input

Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.

•MDC Connection

Selects a port to receive the MDC inputs from.

•RS232C MDC : Communicates with the MDC via a RS232C MDC cable.

•RJ45 MDC : Communicates with the MDC via an RJ45 MDC cable.

•Network Setting

•IP Setting : Manual, Auto

•IP Address : Manually enter the IP Address if IP Setting is set to Manual.

•Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.

•Gateway : Manually enter the Gateway if IP Setting is set to Manual.

MagicInfo

Available Modes

• PC / DVI / DisplayPort

• AV

• Component

• HDMI

• MagicInfo

Note

•MagicInfo can only be enabled when a network box(sold separately) is connected.

•The remote control can be used to select MagicInfo. However, it is recommended to use a separate USB keyboard to utilize MagicInfo fully.

Image 101

Samsung OL46B specifications MagicInfo, ID Setup, ID Input, MDC Connection

Contents

SyncMaster OL46B LCD Display Notational Cleaning the Monitor Power Installation Others Page Page Refer to the Cable Safety Specifications Power Installation GuideRated Current of the Power Plug /Cord/Appliance Coupler Unpacking Package Contents Sold separately Your LCD DisplayOthers Rear Front Receives a signal from the Display port Audio OUT RJ 45 MDC MDC Port DP OUT Remote Control Source OFF Fixing the product Unpacking Dimensions of the base Process to fix the product Connecting to Magicinfo OUT Connecting the Power Connecting a USB devices Connecting a LAN Cable Internet web site Installing the Monitor Driver AutomaticMonitor Driver Installing the Monitor Driver Manual Page Page Page Page Page Page Uninstallation Installation Using MDC via RS-232C serial data communications standards Connecting to MDC Communicate with LAN cable Using MDC via Ethernet Communicate with RS232C cable via the LAN cable Connection Management Cloning Auto Set ID Command Retry Getting Started with MDC Page Main Screen Layout Menus VolumeHome AlertPage Custom Screen Adjustment Dynamic Contrast OptionsGamma Control Auto Motion Plus Size PC Screen AdjustmentPicture Size Detail Bass Sound AdjustmentTreble Balance L/R Video Wall System SetupVideo Wall Format Screen Position Sound Select PIP SizePIP Source General Fan & Temperature Security Safety LockOSD Display Button Lock Clock Set TimerTime Holiday Management Screen Burn Protection Safety ScreenPixel Shift Screen Saver Remote Control Tool SettingsLamp Control Panel Control Information ResetEdit Column Resizing a Window Other Functions Creating Groups Group Management Renaming Groups Deleting Groups Creating Schedules Schedule Management Deleting a Schedule Schedule Modification Issue Solution Troubleshooting GuidePage Source List Input PC DVI, AV, HDMI1, HDMI2, DisplayPort DVI PC AV PC SourceOff Position SizeTransparency DisplayPort PC Edit Name Source AutoSwitch Settings Primary Source Source AutoSwitchPrimary Source Recovery Mode Picture PC / DVI / DisplayPort / MagicInfo ModeSecondary Source Color Tone Custom Color Temp Color ControlOff Cool Normal Warm Custom Red Green Blue Signal Balance Auto AdjustmentImage Lock Coarse Gain Offset Signal Control PIP Picture Hdmi Black LevelNormal Low Color Lamp Control Dynamic ContrastBrightness Sensor Tint Dynamic Standard Movie Custom Picture ResetPicture AV / Hdmi / Component Mode Brightness ContrastSharpness Color Size can be switched PC modePC, Hdmipc Timing 169 Digital NR Digital Noise Reduction Film Mode This function is disabled when PIP or Energy Saving is On Speech SoundMusic Bass Auto VolumeTreble Balance Setup Sound ResetSound Select Speaker Select Language Sleep TimerTime Clock Set Add Timer1 / Timer2 / Timer3Holiday Management Delete All Menu TransparencyDelete Selected Energy Saving Safety Lock Change PINLock Full Video WallFormat Screen Position HorizontalVertical Pixel Shift Safety Screen Bar Eraser Pixel Timer Eraser PeriodBar Pixel Resolution SelectSide Gray Light Dark Advanced Settings Power On AdjustmentFan & Temperature OSD Rotation Temperature Control Fan Speed SettingFan Control Auto Manual Button Lock Current TemperatureAuto Power User Auto Color ResetStandby Control Auto Color No Signal OSD Not Optimum Mode OSDLamp Schedule OSD Display MDC OSD Software Upgrade Multi Control Setup ResetReset All MagicInfo ID SetupID Input MDC Connection Select Application step Page Page Page Maintenance and Cleaning Self-Test Feature Check Check List Symptoms and recommended ActionsProblems related to the Installation PC Mode Not Optimum Mode message Problems related to the Screen Problems related to the Remote Control Problems related to AudioPage Page General Plug-and-Play PowerSaverDot Acceptable US only Preset Timing Modes Specifications Product Information Image Retention Free For a Better Display Power Off, Screen Saver, or Power Save Mode Change the characters Color periodically Page North America Contact Samsung WorldwideLatin America Europe Bosnia Asia Pacific CIS Africa Responsibility for the Pay Service Cost to CustomersMiddle East Terms Product damage caused by customers faultNot a product defect Correct Disposal Correct disposal of batteries in this product Authority