Samsung P1053 Installing the Washing Machine

Installing the Washing Machine

Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received all of the

items shown below. If the washing machine was damaged during shipping or you do not have all of the items, con-

tact your Samsung dealer immediately.

Before you install the washing machine, select a location with the following characteristics:

• A hard, level surface (if the surface is uneven, see "Adjusting the leveling feet," below)

• Away from direct sunlight.

• Adequate ventilation

• Room temperature that will not fall below 0 ˚C

• Away from sources of heat such as coal or gas Make sure that the washing machine does not stand on

its power cord.

Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a car-

peted floor.

If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet):

1. Loosen the leg bolt by turning it with your hand until it is

at the desired height.

2. Tighten the locking nut by turning it with the wrench.

• Place the washer on a sturdy, flat surface.

If the washer is placed on an uneven or weak surface,

noise or vibration occurs. (Only a 1 degrees angle is

allowed.)

Cover top

Base cover

Adjustable feet

Debris filter

Door

Detergent

drawer

Control panel

Bolt hole

covers

Plug

Cold Water

supply hose

Drain Hose