Washing a Load of Laundry
To add liquid detergent:
1.Remove the divider from its slot and insert it into compartment 
.
2. Pour in the liquid detergent.
•Liquid detergents and delay start(please see “delay start” page 6).
With delay start use a dosage container for liquid detergents,e.g. ball, otherwise the liquid detergent will run slowly out of the soap dispenser and congeal. If this happens blockages and a nasty smell, take dosage container out of the drum at the end of the programme.
With liquid detergents use the liquid insert in the soap dispenser. Or use dosage aids,e.g. dosage or bags which are provided with the detergent.
Washing clothes using fuzzy logic
Your new washing machine makes washing clothes easy, using Samsung’s "fuzzy logic" automatic control system. When you select an automatic wash program, the machine will automatically set the correct temperature, washing time, and rinse speed according to the weight of the clothes.
To wash clothes using the fuzzy logic programs:
1.Turn on your sink's water faucet.
2.Press the 
(On/Off) button.
3.Press the Door Open button.
Note: You cannot open the door until you press
(On/Off) button.
4.Add the detergent, softener, and prewash detergent (if necessary) into the appropriate compartment.
Note: Prewash is only available when washing cotton, synthetic, delicate garments. It is only necessary if your cotton clothing is heavily soiled. If you wish to use prewash, please see "Setting prewash" on page 10.
5. Choose the Course program to the type of clothes you are washing: Cotton, Synthetic, Delicate, Wool, Speedy (for a fast cycle) and Eco (to economize on water usage), Drain, Rinse+Spin(not avaiable in
You will see the indicators light up on the control panel.
6.At this time, you can control the wash temperature, spin speed and delay time(not available
7.Press the Start/Pause button and the wash cycle will begin.
8.To pause the wash cycle, press the Start/Pause button again.
SAMSUNG Washing Machine Owner’s 9
Instructions
