Samsung PCL 5415R, PCL 6215R, PCL545R Connecting a VCR

2.5 CHAPTERTWO: INSTALLATION

INSTALLATION

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a

cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1if you have

not yet connected to an antenna or a cable system.

1

Connect a coaxial cable between the

ANTENNAOUT terminal on the VCR

and the antenna terminal on the TV.

A coaxial cable is usually included with

a VCR. (If not, check your local elec-

tronics store).

2

Connect a set of audio cables between

the AUDIOOUT jacks on the VCRand

the AUDIOjacks on the TV.

If you have mono VCR, connect

L(mono) to VCR audio out using only

one audio cable.

3

Connect a video cable between the

VIDEOOUT jack on the VCR and the

VIDEO jack on the TV.

If you have a S-VHS VCR, use the S-

Video connections and remove the

video cable. Do not connect the video

cable and the S-Video cable to video 1

simultaneously.

Follow the instructions in “Viewing a

VCR or Camcorder Tape” to view your

VCR tape.

Contents

Main Warning! Important Safety Instructions CAUTION Thank You for Choosing Samsung Important Safety Information Page FCC Information C Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1 Chapter 2: Installation . . . . . . . . . . . . . . . . 2.1 Chapter 3: Operation. . . . . . . . . . . . . . . . . . 3.1 C Chapter 3: Operation (Cont.) . . . . . . . . . . 3.14 Chapter 4: Special Features . . . . . . . . . . . . 4.1 Chapter 5: Troubleshooting . . . . . . . . . . . . 5.1 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1 List of Features Chapter One Familiarizing Yourself with The TV Page Page Page Page Connecting VHF and UHF Antennas Chapter Two Connecting Cable TV 2 .3 Cable with a Cable box that Descrambles All Channels This terminal might be labeled ANT IN, VHF IN,or simply, IN. Connecting to a Cable Box that Descrambles Some Channels Page 2 .5 Connecting a VCR Connecting a Second VCR to Record from the TV (The VCR input jacks might be either on the front or rear of the VCR.) Connecting a Camcorder 2 .7 Connecting a DVD (480i, 480p) Player Connecting audio and video jacks Connecting a DTV Set-Top Box (480p, 1080i) Connecting Surround Speakers(PCL545R only) Installing Batteries in the Remote Control Chapter Three Turning the TV On and Off continued... You can also use the POWER button on the front panel. Plug & Play Feature Note: Plug & Play feature doesnt work when the V-chip is on or when in the A/V mode. Using the Perfect Focus Feature 3 .4 Adjusting Manual Convergence continued... Page The display identifies the current channel and the status of certain audio-video settings. Viewing the Menus and On-Screen Displays Selecting a Menu Language Selecting the Antenna Input Memorizing the Channels Note: Channel auto program does not function when the V-chip is active. Changing Channels Use the number buttons to quickly tune to any channel. Selecting Your Favorite Channels To Store Your Favorite Channels: To View Your Favorite Channels: Note: Only memorized channels can be set as Favorite channels. 3 .12 Setting the Blue Screen Mode Labeling the Channels Note: You cannot select Labeling in the A/V mode. 3 .14 Picture Control Customizing the Picture After adjusting an item, the gauge will automatically disappear (after about 5 seconds). Page 3 .16 Selecting the Color Tone Adjusting the Volume Sound Control Using Mute At any time, you can temporarily cut off the sound using the Mute button. Page Page Setting the Clock Option 1: Setting the Clock Manually When selecting the hours, be sure to select the proper time of day (AM or PM). The time will appear every time you press th Display button. 3 .20 Option 2: Using the Local PBS Channel to Automatically Set the TV Clock Selecting a Signal Source (External A/V) You must select the appropriate mode in order to view the VCR or Camcorder signal on the TV. 4 .1 Chapter Four Fine Tuning Channels Use fine tuning to manually adjust a particular channel for optimal reception. Digital Noise Reduction Changing the Screen Size Normal Zoom2Zoom1 Using the R.surf feature Setting the On/Off Timer Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 10 to 360 minutes). Dolby Surround The Dolby Surround Pro Logic option allows you to enjoy programs in surround sound. Choosing a Multi-Channel Sound (MTS)track 4 .9 Auto Volume Viewing Closed Captions Note: The Caption feature doesnt work in Component1(480p), Component2, Zoom1, or Zoom2 mode. Viewing Picture-in-Picture Page Note: When the selection of ANT-B or Component mode is made, the PIP Swap function doesnt work. Note: The PIP channels are not available when RF is set to ANT-B. (The PIP channels link to ANT-A). Using the V-Chip How to Set up Restrictions Using the TV guidelines How to Enable/Disable the V-Chip Page How to Set up Restrictions using the MPAA Ratings:G, PG, PG-13, R, NC-17, X 4 .19 How to Reset the TV after the V-Chip Blocks a Channel (Emergency Escape) Customizing Your Remote Control Page Page Identifying Problems Chapter Five T Cleaning and Maintaining Your TV Using Your TV in Another Country Specifications A