Samsung PCL 5415R, PCL 6215R, PCL545R - page 55

CHAPTERFOUR:SPECIALFEATURES 4.12
SPECIAL FEATURES
1
Press the Menu button.
Move the joystick down to
select “PIP”, then press
the joystick to enter.
Selecting a Signal Source (Antenna or Cable) for PIP
2
Move the joystick down to
select “ANT/CATV.”
If an antenna is connected,
the setting is “ANT.”
If a Cable TV system is pro-
viding the signal, move the
joystick to the left or right
until the appropriate type of
cable system is is displayed
(“STD,” “HRC,” or “IRC”).
Press the Menubutton to exit.
1
Press the Menu button.
Move the joystick down to
select “PIP”, then press the
joystick to enter.
Selecting a Signal Source (External A/V) for PIP
2
Move the joystick down to
select “TV/Video,” then
move the joystick to the
left or right to cycle
through all of the available
signal sources:
“TV,” “Video 1,” “Video 2,”
“Video 3,” “S-Video 1,”
“S-Video 2,” and
“Component1(480i).”
Press the Menubutton to
exit.
▼
For more information about
external A/V components and sig-
nals, see “Selecting a Signal Source
(External A/V)” on page 3.21.
If you select “TV”, the PIP image is
the same as the main image.
Models PCL5415R/PCL6215R do
not support Component1,
Component2 on the PIP subscreen.
▼
Quick way to access the signal
source (PIP): Simply press the
“Source” button on the remote
control.