CHAPTERTHREE: TV OPERATION3.13
OPERATION
Labeling the Channels

Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,

“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-

ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear

next to the channel number.

1
Press CH or CH to tune to the channel that will be labeled.
2
Press the Menu button.
Move the joystick down to
select “CHANNEL”, then
press the joystick to enter.
3
Move the joystick down
to select “Labeling”.
Move the joystick to the
right to begin labeling.
The left-most field will be
highlighted.
(Each label has four
fields. See top para-
graph.)
4
Move the joystick up or
down to select a letter, a
number, or a blank.
(Moving joystick up or
down results in this
sequence: A,B,...Z, blank,
0,1,...9).
5
Move the joystick to the
right switch to the next
field, which will be high-
lighted. Select a second
letter or digit using the
joystick(up or down), as
above.
Repeat the process to
select the last two digits.

Note: You cannot select

“Labeling” in the A/V mode.

Press the Menu button to exit menu.