Samsung PN43E450, PN51E450A1FXZA user manual Channel Menu, Memorizing Channels, Managing Channels

✎✎ By connecting the TV to a receiver or home theater with Dolby Digital and 5.1ch speakers and selecting Dolby Digital, you can maximize your interactive 3D sound experience.

■■Audio Delay: Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the slider. Press ENTEREwhen done (0ms ~ 250ms).

Speaker Settings

■■Speaker Select (External Speaker / TV Speaker)

If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.

✎✎ When you set Speaker Select to External Speaker, the TV’s speakers are turned off. You will hear sound through the external speakers only. When you set Speaker Select to TV Speaker both the TV’s speakers and the external speakers are on. You will hear sound through both.

✎✎ When Speaker Select is set to External Speaker, the VOLUME and MUTE buttons will not operate and the sound settings will be limited.

✎✎ If there is no video signal, both the TV’s speakers and the external speakers will be mute.

Sound Reset

■■Reset All: Resets all sound settings to the factory defaults.

Channel Menu

❑❑ Memorizing Channels

When you first set up your TV using Plug & Play, the TV memorized the channels that were available over the air or through your cable system and added them to the Channel List. The Antenna and Auto program functions described below let you re-run the channel memorization function without having to re-run the Plug & Play procedure.

Antenna (Air / Cable)

Before your television can memorize the available channels, you must select your TV's signal source, Air (using an antenna) or Cable. Select Menu >Channel > Antenna > Air or Cable. After you have selected the signal source, go on to the Auto Program function.

✎✎ Selecting the signal source using the Antenna function also determines the signal source the TV is tuned to. For example, if you receive your TV signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture.

Auto Program

The Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel List.

To start Auto Program, follow these steps:

1.Push MENUm→ Channel → ENTEREon your remote. The Antenna Source screen appears.

2.On the Antenna Source screen, select the source of your TV signal.

Air

If your TV is connected to an antenna choose Air, and then press ENTERE. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose Cable, and then press ENTERE. Go to Step 3.

Auto

If you choose Auto, and then press ENTERE, the TV will automatically select the correct Antenna source. Go to Step 3.

3.On the Cable Type screen, use the ◄/►/▲/▼ buttons to select the type of digital and analog cable systems you have: STD, HRC, or IRC. Most systems are STD (Standard). When done, select Start, and then press ENTERE. The TV will start memorizing channels.

✎✎ Channel memorization can take up to 45 minutes, depending on your cable system.

✎✎ Memorized channels are added to the Added Channel list. These are the channels you will see when you use the Channel buttons on your remote.

Clear Scrambled Channel

This function filters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

✎✎ Press the ENTEREbutton to stop the Clear Scrambled Channel.

✎✎ This function is only available in Cable mode.

❑❑ Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels you've scheduled for viewing. Add or delete Favorite channels, add or delete channels from the Added Channels list, schedule channels or programs for viewing. Watch a channel by selecting the channel in the All Channels, Added Channels, or Favorite screen, pressing the ▲ / ▼ buttons, and then pressing the ENTEREbutton.

	6	Air
Added	6-1	♥ TV #6
	7-1	♥ TV #7
Channels
	9	Air
	8	Air
	9-1	♥ TV #9
	10	Air
	10-1	♥ TV #10
	11-1	♥ TV #11
Air	' Zoom ' Select TTools ► Next Program

Channel List Screens icons are listed on the left side. Select an icon using the ▲/▼ buttons to view each list.

■■All Channels: Shows all currently available channels including those you deleted from the Added channels list.

■■ Added Channels: Shows all Added channels. These are the channels that appear when you press the CH button.

■■*Favorite: Shows all favorite channels.

■■ Programmed: Shows all channels and programs currently scheduled using Timer Viewing.

✎✎ Remote control buttons active on the Channel List screen.

xxGreen (Zoom): Enlarges or shrinks a channel number.

xxYellow (Select): Move the cursor to a channel. Press the Yellow button to select the channel. A cmark appears. Repeat to select additional channels. Then, open the Tools menu and apply a function to the channels you selected.

xxT(Tools): Displays the Channel List Tools menu. (The Tools menus may differ depending on the situation.)

- 4 -