Selecting the Picture Size
You can select the picture size which best corresponds to your viewing requirements.
1Press the MENU ( ) button.
Result: The main menu is displayed.
2Press the … or † button to select Picture.
Result: The Picture menu is displayed.
3Press the ENTER ( ) button.
4Press the … or † button to select Size. Press the ENTER ( ) button.
5Select the required option by pressing the … or † button.
Result: The following options are available.
◆16:9 : Sets the picture to 16:9 wide mode.
◆Panorama : Use this mode for the wide aspect ratio of a panoramic picture.
◆Zoom1 : The screen size when wide screen is vertically enlarged.
◆Zoom2 : The screen size when the Zoom1 screen is vertically enlarged.
◆14:9 : Magnify the size of the picture more than 4:3.
◆ 4:3 | : Sets the picture to 4:3 normal mode. |
6Press the ENTER ( ) button.
➢◆ You can select these options simply by pressing the P.SIZE button on the remote control.
◆If you change the picture size In PIP mode, PIP disappears automatically.
◆Depending on the input source, the P.SIZE options may vary.
◆Check if the Video Wall (refer to page 33) is On if the Picture size is not function. Picture size does not function when the Video Wall is set to On.
Change the setting to Off and try it again.
Positioning and Sizing the screen using Zoom
➢◆ Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction using the … or
† button as well as the screen size.
◆Move the screen up/down using the … or † button after
selecting the by pressing the œ or √ button.
◆Screen enlargement operates only in
◆In PC or DVI mode, you can select either 16:9 or 4:3.
TV |
| Picture |
|
Mode |
| : Dynamic | √ |
Custom |
|
| √ |
Color Tone | : Normal | √ | |
Color Control |
| √ | |
Film Mode | : Off | √ | |
Size |
| : 16:9 | √ |
PIP |
|
| √ |
Move | Enter | Return |
|
|
|
|
|
TVSize
16:9
Panorama Zoom1 Zoom2 14:9 4:3
Adjust | Enter | Return |
PC to DVI Mode
TVSize
16:9
Panorama Zoom1 Zoom2 14:9 4:3
Adjust | Enter | Return |
English - 23