Samsung PPM42M5SSX/EDC Installing the Display Vertically, Example for 2x2 Video Wall function

Installing the Display Vertically

You can install the PDP Monitor vertically. In this case, the fan automatically works. If you wish to stop the fan, position the PDP Monitor horizontally and then set “Fan” to “Off” in the “Function” menu.

Please use the wall attachment panel exclusively when installing vertically. And you have to put left side of the PDP Monitor on top when viewed from front.

Before Using the Video Wall and the Multiple Display Control function

Example for 2x2 Video Wall function

1Please create ID for each PDP Monitor before installing them close together. It may be difficult to

create IDs when operating the remote control for PDPs that are installed close to each other.

2For details about Video Wall configuration and operation, refer to “Setting the Multiple Screen” on page 33.

Example for 2x2 Video Wall connections

Rear of the PDP Monitor

②

Rear of the PDP Monitor

①

➢ ◆ You can connect a Composite (Video) without	Example for Multiple Display Control connections
a distributor as you would connect a PC.
◆ Select ID input on the menu. Use the numeric
buttons to enter the ID for PDP Monitor
adjustment. You can operate the remote
control only for the PDP Monitor that has been
selected.

◆For details about Multiple Display Control, refer

to “Setting the MDC (Multiple Display Control)” on page 29 and the Help section in MDC program CD.

English - 12