3-4. Selecting A Location
Movement
1
OR
2
Location And Airflow | 6 |
| |
3 |
|
18 in
(460 mm)
4
5
18in
(460 mm)
1Lifting Eye
2Lifting Forks
Use lifting eye or lifting forks to move unit.
If using lifting forks, extend forks beyond opposite side of unit.
3Rating Label (Non CE Models Only)
Use rating label to determine input power needs. Label located under front access door.
4 Plate Label (CE Models Only)
Label located under front access door.
5Rating Label (CE Models Only)
Use rating label to determine input power needs. Label located on rear access door.
6 Line Disconnect Device
Locate unit near correct input pow- er supply.
YSpecial installation may be required where gasoline or volatile liquids are present − see NEC Article 511 or CEC Section 20.
Ref. 800
