Installing Batteries in the Remote Control
1Lift the cover at the back of the remote control upward as
shown in the figure.
2 Install two AAA size batteries.
➢ Make sure to match the “+” and
Do not mix battery types, i.e. alkaline and manganese. 3 Close the cover as shown in the figure.
➢Remove the batteries and store them in a cool and dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)
➢If the remote control doesn’t work! Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
1 | Plug the mains lead into an appropriate socket. | ||||||
| ➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. | ||||||
2 | Press the |
| (Power) button (On/Off) on the front of the television or press the POWER button on the | ||||
| |||||||
| remote control to switch the television on. The programme that you were watching last is | ||||||
| automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing | ||||||
| Channels Automatically” on page 13 or “Storing Channels Manually” on page 14. | ||||||
| ➢ If the television is initially powered on, several basic customer settings proceed automatically. | ||||||
3 | Refer to “Plug & Play Feature” on pages 10~11. | ||||||
To switch the television off, press the |
| (Power) button (On/Off) on the front of the television or press | |||||
| |||||||
| the POWER button on the remote control. | ||||||
4 | To switch the TV on, press the |
| (Power) button (On/Off) on the front of the TV or press the POWER | ||||
| |||||||
| button or number buttons on the remote control. |
English - 9