Switching Your Television On and Off, Viewing the Menus

Installing Batteries in the Remote Control

1Lift the cover at the back of the remote control upward as shown in the figure.

2 Install two AAA size batteries.

➢  Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

Do not mix battery types, i.e. alkaline and manganese. 3 Close the cover as shown in the figure.

➢Remove the batteries and store them in a cool and dry place if you won’t be using the remote control for a long

time. The remote control can be used up to about 23 feet from the TV.

➢If the remote control doesn’t work! Check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?


1	Plug the mains lead into an appropriate socket.
	➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2	Press the	(Power) button (On/Off) on the front of the television or press the POWER button on

	the remote control to switch the television on. The channel that you were watching last is re-selected
	automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing
	Channels Automatically” on page 13 or “Storing Channels Manually” on page 14.
	➢ If the television is initially powered on, several basic customer settings proceed automatically.
3	Refer to “Plug & Play Feature” on pages 10~11.
	To switch the television off, press the			(Power) button (On/Off) on the front of the television or press

	the POWER button on the remote control.
4	To switch the TV on, press the		(Power) button (On/Off) on the front of the TV or press the POWER

	button or number buttons on the remote control.

1Press the MENU button.

The main menu is displayed on the screen.

Its left side has five icons: Picture, Sound, Channel, Setup, and Input.

2Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4Press the ▲/▼/◄/► button to change the selected items.

Press the RETURN button to return to the previous menu.

5Press the EXIT button to exit from the menu.

English -