Standard Installation

The Windows Standard Installation procedures are described below.

For the Standard Installation, a USB keyboard is necessary. You have to connect the USB key- board before turning the computer on. The descriptions assume that you are using an external USB ODD and USB keyboard.

1 In the system recovery media start screen, click Standard Installation.

2 The description for the Standard Installation appears.

Click Yes to start the Windows installation. The system restarts and the Windows installation begins.

If you have set a booting password, enter the booting password when booting the system to continue the installation.

3 After the system has restarted, the message 'Press any key to boot from DVD' appears. Do not press any key at this time.

After a moment the partition configuration screen appears.

To leave the partition unchanged, move to the C:Partition 2 using the direction key ( ) and press <Enter>.

Partition setting is a function that divides the hard disk drive into one or several partitions. Note that changing the partition deletes all data on the hard disk drive.

4 Select the folder to install the Windows operating system.

To delete the previous version of Windows and install in the current folder, press <L> on the keyboard.

Reinstalling Windows XP 112

Page 112
Image 112
Samsung Q1B manual Windows Standard Installation procedures are described below