Setting up your French Door Refrigerator
Connect the water line to the fridge
•Connect the plastic line on the back of your fridge to the cartridge holder outlet (fully insert the plastic line to the cartridge holder outlet).
•Insert plastic clip to the cartridge holder inlet and outlet.
•Turn water on and check for any leakage.
•You can purchase the necessary filter cartridge at the retailer where you purchased this refrigerator. Make sure you buy the
SAMSUNG filter cartridge (Replacement cartridge No : DA29-
00015A) to ensure the best performance.
•The water line must be connected to drinkable water only
Cartridge
Holder
Clip
Filter cartridge
Plastic line (Provided)
•A compression fitting and nut kit is supplied with the unit and it is inside the fridge drawer.
•When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line(Icemaker supply line)
To use without the water filter
Connecting to the water supply line
•Shut off the main water supply line and turn the Ice maker to the off position.
•Locate the nearest cold water drinking line.
1.Cold Water line
2.Pipe Clamp.
3.Plastic line
4.Compression Nut
5. Compression Sleeve
6.Packing Nut.
7.Shut Off Valve
Connect the water line to the fridge
1) Slip the compression nut through the plastic tubing. | Household water line |
| ||
Copper tubing or Plastic tubing | ||||
2) After inserting the compression nut into plastic tubing, tighten | ||||
(Not supplied) (Not supplied) | ||||
| the compression nut onto 1/4” compression fitting(Provided). |
| Compression Nut | |
| Do not overtighten the compression nut. |
| (1/4”) (Purchased) | |
|
| Bulb | ||
• | Using Copper Tubing | Ferrule | ||
| ||||
| - Slip the compression nut and ferrule on copper tubing as | (Purchased) |
| |
| Plastic Tubing | Compression | ||
| shown. | fitting (Provided) | ||
| (Provided) | |||
|
| |||
• | Using Plastic Tubing |
| Compression Nut | |
| - Insert the molded end(Bulb) of the plastic tubing into the |
| (1/4”) (Provided) | |
| Refrigerator |
| ||
| compression fitting. |
| ||
|
|
| ||
CAUTION
Do not use without the molded end(Bulb) of the plastic tubing.
3)Tighten the compression nut onto the compression fitting.
4)Turn water on and check for any leakage.
•Water line must be connected to drinkable water only.
•When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line
(Icemaker supply line).
18_ setting up
