Operating _35
02 oPERAting
CHAnging tHE intERioR LigHts

Changing the interior Light in the Refrigerator

1. Unplug the power cord from the wall outlet.
2. Remove the screw after removing the cover lamp by pulling it out.
3. Disconnect the housing connector.
4. Change the LED lamp.
Before changing any of interior lights, unplug the refrigerator from the power supply. If you are unsure
about changing the lights after reading through these directions, contact your service center for help.
Replacement bulb for freezer is available from your local home improvement or electronics store.
Use replacement bulb with size E26, maximum 60 watts. And LED for fridge is available from service
center. If you need to change LED, contact your service center for help.

Changing the Interior Light in the Freezer Drawer

1. Unplug the power cord from the wall outlet.
2. Remove the pull out drawer. Refer to ‘Remove super extended
drawer’ in the manual(on page 31).
3. Turn the bulb counterclockwise.
4. Assembly is the reverse order of disassembly.
Do not place your fingers inside the cover. The lamp may be hot.
CAUTION
CAUTION
coverlamp housingconnector