Connecting to the water supply line

1.First, shut off the main water supply line.

2.Locate the nearest cold, drinking water line.

3.Follow the Water line Installation Instructions in the installation kit.

CAUTION

The water line must be connected

to the cold water pipe. If it is connected to the hot water pipe, it may cause the purifier to malfunction.

01

Close Main

Water pipe

Close Main

Water pipe

NO GAP

SETTING UP

4.After connecting the water supply to the water filter, turn your main water supply back on and dispense about 3L to clear and prime the water filter.

Connecting the water line to the refrigerator

1.Remove the cap from water line on the unit and insert compression nut to the water line on the unit after disassembling from provided water line.

2.Connect both water line from the unit and water line in the kit.

3.Tighten the compression nut onto the compression fitting. There should be no gaps between (A, B & C )

4.Turn water on and check for any leakage.

Loosen a

Remove

cap

Water Line

from unit

Water Line

from unit

No gap

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make sure you get a snug, leak-free connection.

Before being used, the leakage in these places should be examined

CAUTION

• Samsung Warranty does not cover WATER LINE INSTALLATION.

• It will be done at customer’s charge unless the retail price

includes installation cost.

• Please contact Plumber or Authorized Installer for the installation if needed.

• If Water leakage occurs due to improper installation, Please contact installer.

Setting Up _15

DA99-01623N-EN.indd 15

2011.4.27 10:44:2

AM

 

 

 

Page 15
Image 15
Samsung RF26NEPN1/SML, RF26DEPN1/SML Connecting to the water supply line, Connecting the water line to the refrigerator