DISASSEMblE ThE REFRIGERATOR DOORS
1. With the door opened, remove the Top Table cap ( 1 ) with a Flat head screwdriver, and close the door. Remove the 3 screws holding down the Top Table and remove the Top Table( 2 ).
2
1 
01 SETTING
2.Disconnect the electrical connector
( 3 ) above the upper right door hinge and the 3
electrical connectors ( 4 ) above the | 4 |
upper left door hinge. |
|
Disconnect the water tube ( 5 ) by |
|
pulling the tube fitting ( 6 ) apart as |
|
shown in the picture. |
|
| Red Clip |
| (1/4”) |
3
5 
6
UP
3. Remove the 3 hex head bolts( 7 ) found attached |
| |
to the upper left and right door hinges with a | 8 | |
Wrench(10mm). | 7 | |
With a Philips head screwdriver, remove the | ||
| ||
ground screw( 8 ) found attached to the upper | 9 | |
left and right door hinges. Remove the upper left | ||
and right door hinges( 9 ). |
|
4.Lift the door straight up to remove.
5.With a Philips head screwdriver, remove the 2 screws (10) attached to the lower left and right door hinges.
With a Allen wrench(5mm), remove the 2 hex | 12 |
head bolts (11) attached to the lower left and right | 10 |
door hinges. | 11 |
Remove the lower left and right door hinges(12). |
|
• Be careful not to missplace the hinge cap because it can be easily taken off.
Setting Up _9
