ReattaChing the RefRigeRatoR dooRs
4.Connect the water line ( 5 ) and then insert a clip on the coupler with pulling tube. Connect the one connector( 4 ) on left side door and two connectors ( 3 ) at each side of the top cap.
The clip is enveloped inside of the top cap.
5 | Cabinet |
| Tube |
Dispenser
Door Tube
3
4
Red Clip (1/4”)
3
PU ESTTING01
The water line ( 5 ) must be fully inserted to the marked line to prevent |
|
CAUTION water leakage from the dispenser. | coupler |
|
5.Position the Top Table( 2 ) in place.
With a Philips head screwdriver, insert and tighten the 3 screws into the Top Table. With the door opened, reinsert the
Top Table cap( 1 ) and close the doors.
2
When reattaching the top table, make sure that the wires are not pressed or damaged by the top table.
1
Setting Up _13
