Setting Up _17
01 sEtting uP
ADJusting tHE FREEzER DRAwER LEVEL
1. Locate the height-adjuster ( 1
) in the freezer drawer.
Unscrew the four Phillips screws ( 2
) slightly to loosen the door.
2. Loosen the controller screw( 3
) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
Freezer Drawer
Adjustment part
12
3
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the Height Adjuster to +2.0 to reduce the door
slope.
Slope
Reference
plane
DA68-01819A.indb 17 2009.9.22 3:9:45 PM