Samsung RF4287HARS user manual The clip is enveloped inside of the top cap

4.Connect the dispenser door tube ( 5 ) and, then insert a clip on the coupler while pulling tube.

Connect the connector ( 4 ) on the left side door and one connector ( 3 ) on the right side door.

The clip is enveloped inside of the top cap.

4

3

Red Clip

(1/4")

5	Cabinet
	Tube

Dispenser

Door Tube

	dispenser door tube
The dispenser door tube ( 5 ) must be fully inserted to the marked line to	coupler
caution prevent water leakage from the dispenser.

5.Position the top table ( 2 ) in place. Insert the 3 screws into the top table then, tighten with a philips screw driver (+). Open the door, reinsert the cap top table ( 1 ), and then close the doors.

When re-attaching the top table, make sure that the wires are not pressed or damaged by the hinge cover.

After assembling, close the door and check to see whether the door has gaps between gaskets or is tilted.

If there is a problem, please refer to “Adjusting the doors” on page 18.

2

1

14_ setting up