Using the two lever dispenser
Push the appropriate ice type button to select what you want dispensed.
NO ICE
Select this if you want to turn ice maker off
Using the ice lever ( 1 )
Push the Ice lever dispenser ( 1 ) gently with your glass. Ice will be released from the dispenser.
You can choose the type of ice by pushing the cubed or crushed button first.
Using the Water lever ( 2 )
Push the Water lever dispenser ( 2 ) gently with your glass. Water will be released from the dispenser.
1
2 
Even if you push the water and Ice lever simultaneously, the dispenser operates only the option you selected or pushed first.
Using the Ice & Water Dispenser together
To get Ice and water, push the Ice lever ( 1 ) first for ice, then | check the |
move your glass glass down and press the water dispenser | water level |
| |
lever ( 2 ) for water. |
|
Do not pull the lever out. You could damage or break the caution lever's spring.
• To clean the ice bin/bucket, wash with a mild detergent,
caution rinse well, and dry thoroughly it. Do not use harsh or abrasive cleaners or solvents.
• When you select Cubed Ice after using the Crushed Ice mode, a small amount of residual crushed ice might be produced.
•In case ice doesn’t come out, pull out the ice bucket and press the test button located on the right side of ice maker.
•Do not press the test button continuously when the tray is filled with ice or water. Water may overflow or ice may jam the bucket.
•Normal Use
To fill the ice bucket to maximum capacity after installation, follow these steps:
1.Allow your refrigerator to operate and cool down for 24 hours (or 1 full day). - Waiting 24 hours will allow your ice maker to cool properly.
2.Dispense 4 to 6 ice cubes into the glass.
3.After 8, and then 16 hours, dispense a full glass of ice.
•When you press the Test button, you will hear the refrigerator chime
•The chime sounds automatically again to let you know the ice maker is working well.
28_ Operating
