DISASSEMBLE THE FREEZER DOORS

Be sure to remove the Fridge Door CAUTION before removing the Freezer Door.

Be careful with the wires attached to the bottom of the Freezer Door while disassembling.

1.With the door open, remove the screw holding the cover (A) of the Adjustable Leg at the bottom of the door with a Phillips (+) Screwdriver, and then disassemble the Connector (B).

A

B

2.Lift up and remove the Mid Hinge Cap (C) on the Door Hinge above the Freezer Door.

C

3.While pushing the door in the direction of the arrow, lift up the Mid Hinge Shaft (D).

REATTACHING THE

REFRIGERATOR DOORS

Be sure to re-attach the Freezer Door CAUTION before re-attaching the Fridge Door.

Before re-attaching, make sure that all the wire connectors at the bottom of the Freezer Door are connected.

How to Re-attach the Freezer Door

1.Insert the door into the lower hinge (A) in the direction of (1) and then push the door in the direction of (2). Take care not to scratch the door with the Mid-Hinge (B).

B

2

A1

Be careful not to damage the wires on CAUTION the bottom of the door. Avoid stepping

on them, etc.

2.Insert the Hinge Shaft (C) into the Mid Hinge Hole (D) and put on the Hinge Cap (E).

When assembling the Hinge Shaft and the Hinge Cap, be sure to assemble them in the correct direction.

D

4.Being careful that the door does not touch the Mid Hinge (E), tilt the Door forward a little, and then lift it up to remove.

1

E2

18_ setting up

C

E

 

 

D

3.With the door open, join the connectors on the bottom of the door.

-- Be careful not to step on or damage the connectors.

DA68-02836K (EN)-08.indd 18

2015. 8. 26. �� 11:37