Samsung RF905QBLASL/ZA manual Removing the Refrigerator Doors, Disassemble Refrigerator Doors

REMOVING THE REFRIGERATOR DOORS

If the Refrigerator is too large to pass through your doorway easily, you can remove the refrigerator doors.

Tools you will need (Not provided)

DISASSEMBLE THE

REFRIGERATOR DOORS

1. With the Door being closed, remove the screws	up
(3ea) holding the Top Cover (A) with the Phillips
(+) Screwdriver and life up the Top Cover with
all the wire-harnesses being attached.
	01setting
A

2.Disconnect the two wire-harnesses on the left door and one on the right door. (It may differ by models.)

Philips screwdriver	Flat-blade	Socket wrench
(+)	screwdriver (-)	(10 mm)
		3. Flip up the Fixer Lever (B) and pull it forward.
Pliers	Allen wrench	Allen wrench
	(4 mm)	(5 mm)

Disconnect power to the refrigerator before WARNING removing the door or drawer.

•Be careful not to drop, damage or scratch the door/drawer while removing them.

•Be careful not to get injured while removing the door/drawer.

•Reattach the door/drawer properly to avoid:

-- Moisture from air leakage. -- Uneven door alignment.

-- Wasting energy due to improper door seal.

BB

4.Remove the Hinge (C).

C

5.Lift up the Fridge Door and take it off.

•While disassembling and reassembling CAUTION the door, be cautious with the electric

wires not being peeled off.

•Be careful not to have the door fall down.

setting up _15

DA68-02836A-06.indb 15 2016. 6. 25.

�� 8:51