Samsung RF905QBLASL/ZA manual How to Assemble Fridge Door, Assemble the Wire Connector

4.Be careful with the Connector not being stomped on or being damaged. And, assemble the Adjust Leg Cover with the Phillips (+) Screwdriver.

How to Assemble Fridge Door

1.Assemble the detached Fridge Door with the Mid Hinge.

5.After assembling the front of the Top Cover, press down its back to assemble. And then, assemble the screws.

		up
CAUTION	of the disassembling. It is the same for	01setting
•	Assemble the Door in the reverse order
	both of the Fridge and the Freezer Doors.
•	When the Wire Connectors are being
	cross-assembled, the display may not
	work normal.

LEVELING THE REFRIGERATOR & ADJUSTING HEIGHT AND GAP OF THE DOORS

2.Slide the Fridge Hinge (C) into the fixing slot and press it down with the hole on the door being aligned.

C

3.After inserting the Fixer Lever (B) in the direction of the arrow, flip it down to assemble.

HOW TO LEVEL THE REFRIGERATOR

When the Refrigerator is put on an unleveled floor, it may cause a height difference of the doors.

•Insert the Flat-Head (-) Screwdriver into the slot in the Leveling Leg and adjust the level by turning it clockwise or counter-clockwise. When rotating it clockwise, it becomes higher. And, when rotating it counter-clockwise, it becomes lower.

B

B

flat-blade	Control Lever
screwdriver(-)

4.Assemble the Wire Connector.

• When the Refrigerator is not leveled back and front, put a solid panel (such as a plastic panel, a plastic ruler, etc) on the lower back floor and fix it with plastic tape. And, push in the Refrigerator.

• When pushing in the Refrigerator, take care not to damage the wooden floor or any similar soft floor.

setting up _17

DA68-02836A-06.indb 17 2016. 6. 25.

�� 8:51