Setting Up _17
01 sEttinG uP
ADJustinG tHE FREEzER DRAwER LEVEL
1. Locate the height-adjuster ( 1
) in the freezer drawer.
Unscrew the 8 Phillips screws ( 2
) slightly to loosen the door.
2. Loosen the controller screw ( 3
) with a Phillips screwdriver(+).
3. Find the best level to align the door slope.
After adjustment, tighten the controller screw ( 3
) and philips screws.
Freezer Drawer
Adjustment part
Example) The slope is about 0.08”(2mm) as shown below.
- Rotate the height adjuster to -2.0 to reduce the door slope.
3
Slope
Reference
plane
2
1