INSTALLING THE WATER LINE
Connecting the water supply line to the refrigerator.
There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store.
PU
Use Copper Tubing | Use Plastic Tubing |
|
|
• ¼” copper tubing | • ¼” plastic tubing |
• ¼” compression nut (2pc) | → Molded end(Bulb) |
• Ferrule (2pc) | • ¼” compression nut (2pc) |
Refrigerator
Compression nut 
Plastic tubing(1/4”) (Supplied) (Supplied)
Compression fitting (Supplied)
G ESTTIN 01
Ferrule | Molded end(Bulb) |
| |
(Not supplied) |
|
| Compression nut |
| (1/4”) (Not supplied) |
Copper tubing or Plastic tubing
(Not supplied) | (Not supplied) |
Household water supply line
1.Slip the compression nut 
through the supplied plastic tubing 
.
2.Tighten the compression nut 
onto the 1/4” compression fitting.
-If you are using copper tubing, slip the compression nut 
(not supplied) and ferrule (not supplied) on copper tubing (not supplied) as shown.
-If you are using plastic tubing
, insert the molded end(Bulb) of the plastic tubing
into the compression fitting.
CAUTION Do not use without the molded end(Bulb) of the plastic tubing
.
3.Tighten the compression nut 
onto the compression fitting. Do not 
.
4.Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you get a snug,
Installing the water filter.
After remove the right side upper shelf, you can install the water filter more easily.
1. Remove the water filter cover ( 1 )
2. Remove the fixed cap ( 2 ) by turning it counter clockwise. Keep the cap in a safe place for later use if you don’t use the filter.
3. Remove the water filter ( 3 ) from the box and put a | 2 |
| |
replacement indicator sticker (Indicator sticker is included in |
|
the box) on the filter as shown. Place the sticker on the filter |
|
that dates six months in the future. For example, if you install |
|
the water filter in March, put the “SEP” sticker on the filter |
|
to remind you to replace it in September. This way, you can |
|
remember the time to replace the water filter. Normally, a filter |
|
life is about 6 months. |
|
1
3
Indicator sticker (month indicator)
Setting Up _19
