REAttACHinG tHE REFRiGERAtoR DooRs
4. Connect the water line ( 5 ) and then insert a clip | 4 | 3 |
| ||
on the coupler with pulling tube. Connect the one |
|
|
connector ( 4 ) on left side door, the other connector |
|
|
( 7 ) on right side door and two connectors ( 3 ) at |
|
|
each side of the top cap. |
|
|
The clip is enveloped inside of the top cap.
5
7 3
01 TTINSE G UP
The water line ( 5 ) must be fully inserted to the marked line to prevent | coupler |
CAUTION water leakage from the dispenser. |
5.Position the Top Table ( 2 ) in place.
With a philips head screwdriver, insert and tighten the
3 screws into the Hinge Cover. With the door opened, reinsert the Hinge Cover cap ( 1 ) and close the doors.
When reattaching the hinge cover, make sure that the | 2 |
wires are not pressed or damaged by the hinge cover. |
|
| 1 |
Setting Up _13