Setting up your French Door Refrigerator
2. Disconnect two connectors ( 3 ) at each side of |
| ||
the top cap and the one connector( 4 | ) on | 4 | |
left side door. Remove the tube ( 5 ) with | |||
| |||
pressing the dark gray color part ( 6 ) of the |
| ||
water line coupler. |
|
| |
If a red clip is on the coupler, |
| 3 | |
|
| ||
CAUTION it must be removed before removing |
| ||
the tube. | 5 |
| |
|
| 6 |
3. Remove the 3 hex head bolts ( 7 ) attached to the upper | 8 |
left and right door hinges with a wrench(10mm). | 7 |
With a Philips head screwdriver, remove the ground |
|
screw ( 8 ) attached to the upper left and right door | 9 |
hinges. |
|
Remove the upper left and right door hinges ( 9 ). |
|
4. Lift the door straight up to remove.
5.With a Philips head screwdriver, remove the two screws ( 10 ) attached to the lower left and right door hinges.
With an wrench(3/16”), remove the two hex head bolts ( 11 ) attached to the lower left and right door hinges.
Remove the lower left and right door hinges ( 12 ).
12
10
11
10_ Setting Up