Setting up

Reattaching the front leg cover

NOTE

Before attaching the cover, check water connector for leakage.

Replace the front leg cover by turning the three screws clockwise, as shown in the figure.

up Setting

Levelling the refrigerator

Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so you can then make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.

NOTE

The front of the refrigerator is also adjustable.

When the freezer door is lower than the fridge

Insert a flat-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to level the freezer.

Leg

Screw Driver

When the Freezer door is higher than the fridge

Leg Screw Driver

Insert a flat-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to level the fridge.

NOTE

Refer to the next section for the best way to make very minor adjustments to the doors.

28  English

DA68-03176S-01.indb 28

2015. 5. 16. �� 9:09