Secure the water line.
Clip A
Water line
•Using clip (A), fix the water line to the wall (the back of refrigerator).
•When the water line is secure, make sure whether the water line is not excessively bent, pinched or squashed.
Removing any residual matter inside the water supply line after installing filter.
1.Turn ON the main water supply & turn OFF the valve to the water supply line.
2.Run water through the dispenser until the water runs clear (approximate 3 liter). This will clean the water supply system and remove air from the lines.
3.Additional flushing may be required in some households.
4.Open the refrigerator door and make sure there are no water leaks coming from the water filter.
NOTE
A newly installed water filter cartridge may cause water to briefly spurt from the water dispenser. This is due to air getting into the line. It should pose no problem to operation.
up Setting
English 37
2015. 5. 16. �� 9:10 |