Lexmark PRO4000C, 90P3000 manual Add the printer, In Mac OS X version 10.5 or later

Networking 115

3Add the printer (see “Add the printer” on page 115).

4A second print queue will be created. Remove the Ethernet queue if you do not want to switch back to accessing the printer over an Ethernet connection.

If the printer is currently set up for wireless

1Attach a USB cable to the computer and to the printer.

2Add the printer (see “Add the printer” on page 115).

3A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing the printer over a wireless connection.

Using the printer over an Ethernet network

Select the connection type that describes how you currently access your printer:

If the printer is currently set up for wireless

1Plug an Ethernet cable into the printer and to an available port on a switch or wall jack.

2Wait a minute for the Ethernet network interface to become active and acquire an IP address from the network.

3Add the printer (see “Add the printer” on page 115).

4A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing the printer over a wireless network.

If the printer is currently set up locally (using USB connection)

1Plug an Ethernet cable into the printer and to an available port on a switch or wall jack.

2Insert the Software and Documentation CD into the computer you want to use to configure the printer.

3Follow the instructions on the computer screen.

Note: You will need a USB cable to complete the configuration.

Add the printer

In Mac OS X version 10.5 or later

1From the Apple menu, navigate to: System Preferences > Print & Fax or

System Preferences > Print & Scan

2Click +.

3Click the Default or Default Browser tab, and then select your printer.

4Click Add.

In Mac OS X version 10.4 or earlier

1From the Finder, choose Utilities.

2Double‑click Printer Setup Utility or Print Center.