Lexmark PRO4000C, 90P3000 manual Copying, Tips for copying, Making copies, Copy OK Copies

Copying 58

Copying

ADF

Scanner glass

Use the ADF for multiple‑page documents.

Note: The ADF is available only in select printer models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass.

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Tips for copying

•Make sure the exit bin is fully extended and the bin extender is flipped out.

•Use the ADF when scanning two‑sided pages if your printer supports duplex scanning and the ADF supports the original document size.

•Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the ADF does not support the original document size.

•When using the ADF, adjust the paper guides on the ADF to the width of the original document.

•To easily retrieve a document after copying or scanning, lift the ADF input tray.

•When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

•When the document to be copied is in place with the settings you want, press to start copying.

Making copies

1Load paper.

2Load an original document faceup into the ADF or facedown on the scanner glass.

3From the printer control panel, navigate to:

> Copy > OK > Copies

4Press the left or right arrow button to select the number of copies.