Lexmark PRO4000C, 90P3000 manual Ink Low, Load Paper Source with Size Paper, Memory Device Error

Troubleshooting 145

Ink Low

You may need to replace the specified ink cartridge soon. Try one or more of the following:

•Press OK or to clear the message and continue printing.

Note: Depending on your printer settings, you may not be allowed to continue printing until you replace the specified cartridge.

•See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported ink cartridges.

Load [Paper Source] with [Size] Paper

Try one or more of the following:

•Load the specified paper in the tray.

•Press OK to clear the message and continue printing.

•Press to cancel the current job.

Load [Paper Source] with [Size] [Type] Paper

Try one or more of the following:

•Load the specified paper in the tray.

•Press OK to clear the message and continue printing.

•Press to cancel the current job.

Memory Device Error

Try one or more of the following:

•Remove the memory device, and then reinsert it into the card slot or USB port.

•Touch OK or press OK to clear the message.

Network [x] Software Error

[x] is the number of the network connection. Try one or more of the following:

•Press OK to clear the message.

•Turn the printer off and then back on to reset the printer.

Paper Tray [x] Detected

Try one or more of the following:

•Press OK to clear the message.

•Use the arrow buttons to select Change Settings, and then select the paper size and paper type of the media loaded. Press OK for each selection.