Lexmark PRO4000C, 90P3000 manual Installing the printer on other computers, For Macintosh users

Networking 105

For Macintosh users

1Close all open applications.

2Insert the Software and Documentation CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

3Double-click the software installer package, and then follow the instructions on the computer screen. Note: Select Wireless connection when prompted to select a connection type.

Installing the printer on other computers

When the printer is set up on the wireless network, it can be accessed wirelessly by any other computer on the network. However, you will need to install the printer driver on every computer that will access it. You do not need to configure the printer again, although you will need to run the setup software on each computer to install the driver.

For Windows users

1Close all open software programs.

2Insert the Software and Documentation CD.

If the installation dialog does not appear after a minute, then launch the CD manually:

aClick , or click Start and then click Run.

bIn the Start Search or Run dialog, type D:\setup.exe, where D is the letter of your CD or DVD drive.

cPress Enter, or click OK.

3Click Install, and then follow the instructions on the computer screen.

For Macintosh users

1Close all open applications.

2Insert the Software and Documentation CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

3Double-click the software installer package.

4Select My printer is already set up. I am installing it on a new computer.

5Click Continue, and then follow the instructions on the computer screen.

Determining the printer status using the network indicator light

The Wi‑Fi or Ethernet indicator light shows the network status of the printer.

Notes:

•The network indicator light is located on the printer control panel. The printer may have an Ethernet or a wireless indicator light, or both, depending on your printer model. To find out if your printer has Ethernet or wireless capability, see the Quick Reference Guide, or contact your system support person.

•The printer supports one local (USB) connection and one network connection (Ethernet or wireless) at a time. It is not possible to use both Ethernet and wireless at the same time.