Lexmark 90P3000, PRO4000C manual Scenario 5 Country‑ or region‑specific setup, To connect

Faxing 83

Scenario 5: Country‑ or region‑specific setup

Different countries or regions have different types of telephone wall jacks. The standard wall jack adopted by most countries or regions is the Registered Jack-11 (RJ-11). You need to have an RJ‑11 plug, or a telephone cable that has an RJ‑11 connector, so you can connect a device to an RJ‑11 wall jack.

The fax ports on the back of you have a different type of

the printer and the telephone cable that comes with the printer have RJ‑11 connectors. If connector in your country or region, then you may need to use an RJ‑11 adapter.

Connecting the printer to a non‑RJ‑11 wall jack

EXT

LINE

To connect:

1 Connect one end of a telephone cable to the port of the printer.

2Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack.