Lexmark PRO4000C, 90P3000 manual Special wireless installation instructions, Before you begin

Networking 106

Indicator light	Printer status
Off	• The printer is turned off or is powering up.

•The printer is not connected to an Ethernet or a wireless network and is in Sleep mode.

•The printer has not been configured for an Ethernet or a wireless network.

•The printer is configured for an ad hoc connection, but it is not currently communicating with another ad hoc device.

Blinking green • The printer has been configured for an Ethernet network, but it cannot establish a connection with the network.

•The printer is out of the range of the access point (wireless router).

•The printer is trying to communicate with the access point, but the access point is turned off or is not working properly.

•The access point has been turned off, and then turned back on, and the printer is trying to establish a connection with the network.

•The wireless settings of the printer may no longer be valid.

Check if the SSID, WEP key or WPA/WPA2 preshared key/passphrase, security type, and IP address that the printer uses are still correct.

Solid green	•	The printer is connected to an Ethernet or a wireless network and is ready for use.
	•	The printer is connected to your computer or mobile device through an ad hoc connection.

Special wireless installation instructions

The following instructions apply to customers outside of North America who are using a wireless broadband box. Some examples of these boxes include LiveBox, AliceBox, N9UF Box, Freebox, and Club Internet.

Before you begin

•Make sure your box is wireless‑enabled and activated to work on a wireless network. For more information about configuring the box to work wirelessly, see the documentation that came with your box.

•Make sure your box is turned on and that your computer is on and connected to your wireless network.

Adding the printer to your wireless network

1Set up your printer for wireless networking using the setup instructions provided. Stop when you are prompted to select a network.

2If there is an association/registration button on the back of your box, then press it before selecting a network.

Note: After pressing the association/registration button, you have five minutes to complete the printer installation.

3Return to the computer screen.

From the wireless networks list that appears, select your network, and then click Continue. If your wireless network does not appear in the list, then:

a Connect to another wireless network.

For Windows users

Click Unlisted Network.