Lexmark 90P3000 Scanning to a network computer, Scanning to a network folder, Scan OK Computer

Scanning 65

3Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want.

Set the color, quality, original image size, and other scan options. If necessary, press OK each time you make a selection.

4Press .

Scanning to a network computer

1Load the original document faceup into the ADF or facedown on the scanner glass.

2From the printer control panel, navigate to:

> Scan > OK > Computer

3Press the left or right arrow button to manually select the name of the destination computer, and then press OK .

Notes:

•You may be prompted to enter a PIN if the computer requires it.

•To assign a computer name and a PIN to the computer, see the Help for the printer software associated with your operating system.

4Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want.

Set the color, quality, original image size, and other scan options. If necessary, press OK each time you make a selection.

5Press .

Note: For Macintosh users, you may need to enable scanning to your computer through Image Capture to scan documents using a network printer and save the scan output.

Scanning to a network folder

Notes:

•This feature may not appear in the Embedded Web Server, depending on your printer model.

•Make sure you have created a folder shortcut before you begin. For more information, see “Adding a network folder shortcut” on page 66.

1Load the original document faceup into the ADF or facedown on the scanner glass.

2From the printer control panel, navigate to:

> Scan > OK > Network Folder > OK

3Press the left or right arrow button to scroll to the name of the network shared folder you want, and then press

OK .

4Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want.