Lexmark 90P3000, PRO4000C manual Memory card troubleshooting, Troubleshooting 161

Troubleshooting			161
	Error Message:	What it indicates:	Possible solutions:
	Failed to Connect	The printer cannot detect a dial tone.	See the “Fax troubleshooting checklist.”
	Phone Line Error
	Phone Line Not Connected
	Phone Line Busy	Your telephone line or the telephone	• Set the printer to redial.
		line of the receiving fax machine is	• Increase the time between the
		busy. This happens especially if the
			redial attempts.
		printer is sharing the line with other
			• Place a test call to the number to
		devices (telephone, answering
			which you want to send a fax to
		machine).
			make sure that it is working
			correctly.
			• If the telephone line is being used
			by another device, then wait until
			the other device is finished before
			sending the fax.
			• Schedule to resend the fax at a later
			time.
			• Set the printer to scan before
			dialing. The scanned document is
			saved in the printer memory. The
			printer can then retrieve it and
			automatically redial the number.
	No Answer	Auto Answer may have been turned off	• Verify the number, and then resend
		on the receiving fax machine.	the fax.
			• Set the printer to redial.
			Note: Depending on your country
			or region, there may be a limit on
			the number of redial attempts,
			regardless of the redial settings
			that you set in your printer.
			• Schedule to resend the fax at a later
			time.
	No Caller ID	Your printer stopped the call because	Disable Block No‑ID.
	Call Stopped	the incoming fax has no sender
		information. You may have chosen to
		block faxes with no Caller ID or faxes
		without Caller IDs are not allowed in
		your country or region.

To troubleshoot error messages in the fax software, click Help to view the help information for the fax software.

Memory card troubleshooting

•“Memory card troubleshooting checklist” on page 162

•“Nothing happens when a memory card is inserted” on page 162