8-2. Steps for replacing thermostat,

1)Take off the screws fastening the lamp box.

2)Take off the screws fixing the capillary tube.

3)Take off the thermostat.

8-3. Steps for replacing relay,

1)Take off the cover of relay by removing the fastener.

2)Take off the relay by pulling it right hand.

8-4. Steps for replacing door panel,

1)Remove the screws fastening the door panel. Then, door panel can replaced.

8-5. Steps for replacing compressor evaporator unit,

1)The compressor and evaporator are not united in these models and cannot be taken off-together. Cut them into two units at joint with a weider or a cutter.

Then, take them out separately.

12