EN:
1.Remove the two screws at the back of the top cover.
2.Remove the top cover by lifting the back up about 2 inches
| and then sliding it forward. | Top cover | Upper hinge |
3. | Remove the small plug button on the left side of the door | / cubierta por cima | |
| / gozne superior | ||
| top cap. |
|
|
4. | Remove the three screws on the upper hinge (right side ). |
|
|
5. | Remove the hinge . | Left hinge location |
|
Remove the three screws at the left hinge location on the | / colocacion izquierda de gozne | Top plate | |
| top plate . |
| |
|
| / lamina por | |
6. | Remove the screw in the middle of the top plate and remove |
| cima |
| the top plate . |
|
|
7. | Lift the door up and off the bottom hinge (right side ). | Plug button | Door top cap |
8. | Tilt the refrigerator cabinet back to remove the right leveling | / taco boton | / tapapor cima |
| leg. |
| de puerta |
|
|
|
9.Romove the secrews on the bottom hinge (right side )and the left leveling leg. Move the bottom hinge to the left side and secure it with the screws and leveling leg.
IMPORTANT:The left leg has a spacer that must be moved to the right side leveling leg when the door swing is reversed.
10.Screw the right leveling leg ,with the spacer in place,back
in place on the right side. |
| |
11. Position the door on the left bottom hinge .with the | Bottom hinge | |
magnetic gasket holding the door in place replace the top | ||
/ gozne inferior | ||
plateand screws. | Spacer | |
12. Make sure the door is aligned with the refrigerator | / anillo de espaciar | |
Levelinglegs | ||
cabinet before continuing . | ||
/ pie de nivelacion |
13.Secure the top hinge with screws.
14.Slide the top cover back in place and replace the tow screws.
15.Put the plug button in the hole on the right side of the door top cap.
6