Manuals / Tripp Lite / Computer Equipment / Power Supply

Tripp Lite SmartPro Rackmount owner manual Indicator Lights, On/Standby Switch, Mute/Test Switch

Models: SmartPro Rackmount

1 20
Download 20 pages 3.45 Kb
Page 5
Image 5

On/Standby Switch

This momentary switch controls power to the UPS receptacles. Engage it momentarily and release it to toggle between the “ON” mode (power ON at the UPS receptacles) and “Standby” mode (power OFF at the UPS receptacles).

Mute/Test Switch

Use this momentary switch to do two things:

Silence the blackout alarm

Engage this switch and release it. Note: when the battery is nearly depleted, the alarm resumes (and cannot be silenced) to alert you to immediately shut down connected equipment.

Test your UPS’s battery charge

Leave your connected equipment ON. With your UPS plugged in and completely turned ON, engage this switch; hold it there for 5 seconds and release it. The UPS will momentarily switch to

battery to test its charge. The “ ” light will turn ON and the alarm may sound if your UPS fails a self-test and/or the UPS battery is less than fully charged. Let the UPS charge for 12 hours and perform a second self-test. If the light continues to stay on, contact Tripp Lite for service. CAUTION: Do not unplug your UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into your network connections.

Indicator Lights

All Indicator Light descriptions apply when the UPS is plugged into a wall outlet and turned ON.

This green light will shine constantly to indicate AC power is available at the receptacles. It will flash to indicate AC power is not available. (See “System Enable Switch” and “ON/Standby Switch” descriptions above.)

This multi-colored light displays 7 separate UPS battery charge conditions. It will turn from red (low) to yellow (medium) to green (full) to show you the level of battery charge. If the light is constant, then your UPS is operating from line power and the battery is charging. If the light is flashing, then your UPS is operating from battery power and the battery is discharging. When the light flashes red, close any files you are working on and shut down your computer.

Whenever your UPS is automatically correcting high or low AC line voltage, this green light will turn ON and the UPS will gently click. The more the UPS has to correct voltage, the more the green light will turn ON and the more the UPS will click. These are both normal, automatic operations of your UPS, and no action is required on your part.

This red light will turn ON if your UPS fails a self-test and/or the UPS battery is less than fully charged. Let the UPS charge for 12 hours and perform a second self-test. If the light continues to stay on, contact Tripp Lite for service.

5

Page 4 Page 6
Page 5
Image 5
Tripp Lite SmartPro Rackmount Indicator Lights, On/Standby Switch, Mute/Test Switch, Silence the blackout alarm
Page 4 Page 6

SmartPro Rackmount specifications

The Tripp Lite SmartPro Rackmount series is an essential solution designed for businesses and organizations that require reliable power management and protection for their critical IT infrastructure. These uninterruptible power supplies (UPS) are specifically engineered to support the rigorous demands of rack-mounted equipment, ensuring continuous operation even in the event of power disruptions.

One of the standout features of the SmartPro Rackmount series is its robust sine wave output. This technology provides stable, clean power that is crucial for sensitive electronic equipment. By delivering pure sine wave output, the SmartPro UPS protects equipment from surges, spikes, and other electrical anomalies that can cause significant damage or data loss.

The SmartPro series offers multiple configurations with a range of power capacities, allowing users to choose the model that best suits their needs. With models ranging from 1000VA to 3000VA, the series can support a diverse array of devices, from servers and networking hardware to telecom systems. The modular design of the SmartPro units simplifies installation and integration into existing rack setups.

Another significant characteristic is the comprehensive LCD display panel that provides real-time feedback on the UPS status. Users can monitor metrics such as input and output voltage, battery capacity, and load level, enabling proactive management of power resources. The user-friendly interface ensures easy navigation, facilitating quick access to essential information and settings.

The SmartPro Rackmount UPS is equipped with advanced communication features, including USB and serial ports, ensuring seamless integration with various operating systems. This functionality allows for smart shutdown capabilities during prolonged power outages, giving users the peace of mind that their data will remain secure.

Thermal management is another critical aspect of the SmartPro design. These UPS units incorporate temperature-controlled fans that operate only when necessary, minimizing noise and energy consumption while optimizing cooling efficiency.

In addition, Tripp Lite’s SmartPro series includes several safety features such as battery self-test and automatic voltage regulation (AVR). These functionalities contribute to the overall reliability and longevity of the UPS, making it a sound investment for any IT environment.

In summary, the Tripp Lite SmartPro Rackmount series stands out as a robust and versatile power protection solution. With its sine wave output, diverse power capacities, user-friendly display, and advanced communication capabilities, it caters to the critical power management needs of modern businesses while ensuring the safety and reliability of their IT infrastructure.