Safety

This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems.

UPS Location Warnings

•Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.

•For best performance, keep the indoor temperature between 32° F and 104° F (between 0° C and 40° C).

•Leave adequate space around all sides of the UPS for proper ventilation.

UPS Connection Warnings

•Connect your UPS to a three-wire, grounded AC power outlet. Do not remove or modify the ground pin of the UPS's plug.

•Do not use two-prong adapters with the UPS's plug. Do not plug your UPS into itself; this will damage the UPS and void your warranty.

•If you are connecting your UPS to a motor-powered AC generator, the generator must provide clean, filtered computer-grade output.

Equipment Connection Warnings

•Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or signifi- cantly alter the performance of a life-support device.

Battery Warnings

•Your UPS does not require routine maintenance. Do not open your UPS for any reason. There are no user-serviceable parts inside.

•Battery replacement must be performed by qualified service personnel. Because the batteries present a risk of electrical shock and burn from high short-circuit current, observe proper precautions. Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles and replace the existing batteries with the same number and type of new batteries (Sealed Lead-Acid). Do not open the batteries. Do not short or bridge the battery terminals with any object.

•The UPS batteries are recyclable. Refer to local codes for disposal requirements or call 1-800-SAV-LEAD (1-800-728-5323) for complete recycling information. Do not dispose of the batteries in a fire.

•Do not attempt to add external batteries unless your UPS is equipped with External Battery Connectors. Connect only Tripp Lite battery packs with the correct voltage (see voltage requirements label on the rear of your UPS) and the correct connector color to match your UPS’s External Battery Connector.

•Observe proper polarity when connecting replacement batteries. Only connect Negative (black) wires to Negative (black) terminals. Only connect Positive (red) wires to Positive (red) terminals.

•During “hot-swap” battery replacement (when the UPS and connected equip- ment are turned ON) your UPS will not be able to provide battery backup in the event of a blackout because the batteries will be momentarily disconnected as they are exchanged.

2

Page 1 Page 3
Page 2
Image 2
Tripp Lite SmartPro Rackmount Safety, UPS Location Warnings, UPS Connection Warnings, Equipment Connection Warnings
Page 1 Page 3

SmartPro Rackmount specifications

The Tripp Lite SmartPro Rackmount series is an essential solution designed for businesses and organizations that require reliable power management and protection for their critical IT infrastructure. These uninterruptible power supplies (UPS) are specifically engineered to support the rigorous demands of rack-mounted equipment, ensuring continuous operation even in the event of power disruptions.

One of the standout features of the SmartPro Rackmount series is its robust sine wave output. This technology provides stable, clean power that is crucial for sensitive electronic equipment. By delivering pure sine wave output, the SmartPro UPS protects equipment from surges, spikes, and other electrical anomalies that can cause significant damage or data loss.

The SmartPro series offers multiple configurations with a range of power capacities, allowing users to choose the model that best suits their needs. With models ranging from 1000VA to 3000VA, the series can support a diverse array of devices, from servers and networking hardware to telecom systems. The modular design of the SmartPro units simplifies installation and integration into existing rack setups.

Another significant characteristic is the comprehensive LCD display panel that provides real-time feedback on the UPS status. Users can monitor metrics such as input and output voltage, battery capacity, and load level, enabling proactive management of power resources. The user-friendly interface ensures easy navigation, facilitating quick access to essential information and settings.

The SmartPro Rackmount UPS is equipped with advanced communication features, including USB and serial ports, ensuring seamless integration with various operating systems. This functionality allows for smart shutdown capabilities during prolonged power outages, giving users the peace of mind that their data will remain secure.

Thermal management is another critical aspect of the SmartPro design. These UPS units incorporate temperature-controlled fans that operate only when necessary, minimizing noise and energy consumption while optimizing cooling efficiency.

In addition, Tripp Lite’s SmartPro series includes several safety features such as battery self-test and automatic voltage regulation (AVR). These functionalities contribute to the overall reliability and longevity of the UPS, making it a sound investment for any IT environment.

In summary, the Tripp Lite SmartPro Rackmount series stands out as a robust and versatile power protection solution. With its sine wave output, diverse power capacities, user-friendly display, and advanced communication capabilities, it caters to the critical power management needs of modern businesses while ensuring the safety and reliability of their IT infrastructure.
Top Page Image Contents