Changing the direction of the door opening(RL34SC*)
COVER TOP FRONT
CAP SPACER DOOR
HINGE UPP
CAP SCREW CABI | COVER DOOR UPP | |
CAP HINGE HOLE | ||
SCREW F |
SCREW A
Safety Precautions
If the appliance is disconnected from the power supply, you should wait for at least five minutes before reconnecting the power to avoid damaging the compressor.
CAUTION: If the flexible power cord is damaged, it must be repaired by special tools. Thus, it must be replaced by the repair store appointed by the manufacturer.
Do not use inflammable aerosols such as spray paint and dope near the freezer/refrigerator. Otherwise, there will be
HAFT HINGE
CAP HINGE HOLE
CAP SCREW CABI
SCREW F
MID HINGE
SCREW E
REINF
HINGE LOW
SCREW HEX (SCREW D)
FOOT
SCREW HEX
SCREW D
STOPPER DOOR 
SCREW G 
STOPPER HINGE LOW
FIXER HINGE LOW
SHAFT HINGE
STOPPER DOOR
SCREW G 
FOOT
A risk of explosion.
Do not let children hang on the doors or climb the refrige- rator to avoid damaging the refrigerator and injuring the Children.
Do not store corrosive, inflammable and explosive, strong acid or alkali substances such as butane, ether, vitriol, benzene, and alcohol. Bottles containing liquid foods also shall not be stored in the freezer; otherwise the bottles may Be broken.
If the refrigerator can not work normally or is damaged, do not continue using it. Pull out the power plug and contact the local service center immediately. If the power cord is damaged, to avoid any accident, it must be replaced by
Simply Type:
1.Take down HIGNE UPP and
2.Take down SCREW A, SCREW E and MID HINGE, and then the refrigerator door. Take down CAP HINGE HOLE, CAP SCREW CABI and SCREW F. Then fix them at right.
3.Gently incline the appliance in less than 45 degree, remove the right side FOOT, and unfasten the SCREW D. Take down HINGE LOW, FIXER HINGE LOW ,SHIFT HINGE and STOPPER HINGE LOW. Reverse and fix STOPPER HINGE LOW with FIXER HINGE LOW to the left of HINGE LOW and SHIFT HINGE.
4.Take down left FOOT and unfasten SCREW D. Take down and fix REINF to the right. Then install FOOT.
5.Take down SCREW G and STOPPER DOOR in the fridge and freezer doors and install them at the left of the doors. Take down CAP HOLE DOOR and CAP SPACER DOOR and fix them at the left of the doors,
6.Fix MID HINGE with SCREW A and SCREW E, and install the freezer door. Fix left HINGE- LOW and install FOOT. Put the refrigerator stable and install the fridge and freezer doors. Fix HINGE UPP with SCREW A.
Service agent of the manufacturer or a qualified staff.
Do not splash water on the top or back of the refrigerator to avoid reducing the insulation effects of the appliance.
If you wish to dispose of the freezer/refrigerator, please first remove the door seals.
When the appliance is disposed of, it shall be handled by professional staff instead of being discarded casually; otherwise it may cause hazards or other dangers to the Environment.
14 | 3 |
