INSTALLING THE FRIDGE/FREEZER
Allow an adequate space and install the fridge/freezer on a firm, level floor.
•If the appliance is not level, there may be unusual noises and poor cooling.
•Wait for at least one hour before plugging the appliance in.
Clean the fridge/freezer.
• Wipe and clean the appliance inside and outside with a damp cloth.
Plug the fridge/freezer into a wall socket used exclusively by this appliance.
• This appliance must be properly grounded.
Place the food in the fridge/freezer.
• It is recommended that you wait for the appliance to cool for
Warning
Use of an grounded socket exclusively for the appliance:
•If you are using a socket with an earthing terminal, you do not require a separate earthing connection.
Use of a non-grounded socket:
•Connect the “earthing wire” to the copper plate and bury it at a depth of at least 25 cm in the ground.
25cm
LEVELLING
If the front of the appliance is slightly higher than the rear, the door can be open and closed more easily.
The appliance tilts down to the left.
Turn the left adjusting leg in the direction of the arrow with a flat head screwdriver until the appliance is level.
The appliance tilts down to the right.
Turn the right adjusting leg in the direction of the arrow with a flat head screwdriver until the appliance is level.
4
