Samsung RL38SBSW - REVERSING THE HANDLE BAR [FRIDGE/FREEZER], -ASSEMBLY OF THE FREEZER DOOR, -ASSEMBLY OF THE FRIDGE DOOR, REVERSING THE DOOR SWING

REVERSING THE DOOR SWING

- REVERSING THE HANDLE BAR [FRIDGE/FREEZER]

15. Detach the CAP SCREW	16. Switch the position of the
HANDLE with flat screwdriver and	CAP HOLE DOORs, pulling
disassemble the HANDLE BARs.	out and pushing them in.

-ASSEMBLY OF THE FREEZER DOOR

18.Exchange the positions of a bolt and 19. After switching the position

the assy HINGE LOW after making	of the CAP HOLE HINGE
a hole with phillips head driver on	LOW, reassemble the
the left bottom side of the unit.	COVER LEG FRONT.

17.Reattach the HANDLE BARs on the other side of doors in reverse order.

20.Switch the position of the

CAP HOLE HINGE MID and a screw.

21.Switch the position of the STOPPER DOOR and the GROMMET HINGE as shown.

22.Switch the position of the GROMMET HINGE and the CAP HINGE HOLE.

23.Carefully put the Freezer door back on and assemble HINGE MID with 2 bolts and a screw.

STOPPER

GROMMET

-ASSEMBLY OF THE FRIDGE DOOR

24.Carefully put the Fridge door back on.

25.Secure the ASSY HINGE UPP with 3 bolts as shown. Make sure the Fridge Door is firmly closed.

17