setting up your refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of this Samsung Refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers.

Selecting the best location for the Refrigerator
• A location with easy access

150mm

 

to the water supply.

 

 

 

• A location without direct

 

 

exposure to sunlight.

 

 

• A location with level (or

 

100mm

nearly level) flooring.

100mm

• A location with enough

 

 

space for the Refrigerator

 

 

doors to open easily.

 

 

•Allow sufficient space to the right, left, back and top for air circulation. If the Refrigerator does not have enough space, the internal cooling system may not work properly.

•Please ensure that appliance can be moved freely in the event of maintenance & service.

First thing! Make sure that

817mm

 

you can easily move your

 

 

 

Refrigerator to its final location

1249.0mm

RL62*:1460mm RL67*:1510mm

by measuring doorways (both

 

 

width and height), thresholds,

 

 

ceilings, stairways, etc.

 

 

 

1368.5mm

 

•Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

•If you install the Refrigerator where is below 10ºC, it may not function in optimum level.

When moving your refrigerator

To prevent floor damage be sure the front CAUTION leveling legs are in the up position(above the

floor). Refer to ‘Adjusting the doors’ in the manual (on page 12)06_ setting up

 

 

 

 

 

 

 

 

Screwdriver(

 

-)

Control Lever

 

FLOORING

For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 106kg.

To protect the finish of

the flooring, cut a large section of the cardboard

carton and place under

the refrigerator where you are working. When moving the refrigerator, be sure to pull it straight out

and return it to position by pushing it straight in.

INSTALLATION OF THE WATER LINE (AUTO ICE MAKER MODEL)

Before you install the water line
•The water line installation is not warranted by the refrigerator manufacturer.

So before you install the water line, read the whole steps for installing and follow these instructions carefully to minimize the risk of expensive water damage.

•Banging pipes (water banging in the pipes) in house plumbing can cause damage to fridge parts and lead to water leakage or flooding. Call a qualified plumber to correct the problem before installing the water supply line to the fridge.

DA68-01817M-EN.indd6

2011.1.11 5:14:13

PM