Reattaching the refrigerator doors
Reattaching the Freezer Door
1)Reattach a phillips screw (➀) and two hex head screws (➁) to the hinge completely.
2)Place the hole in the bottom of the door (➃) over the hinge (➂).
3)Insert the upper hinge shaft (➄) into the hole (➅). After levelling between the hinge brackets (➆). Reattach and close the latch (➇) along the arrow.
Connect the water tube (➈) and the wires (➉). Then, place the water tube(➈) on the hanger ( 11 )
NOTE | Be sure to insert the water tube and push to the end. | ||
|
|
| |
4) Put the connector (12 ) in the guide (13 ) of the | 5) | Put the front part of the upper hinge cover (14 ) on | |
| 15 | ||
|
|
| the front part of the upper hinge ( ) and reattach |
|
|
| it from the front of the upper hinge cover first. |
|
| 6) | Reattach a phillips screw to the hinge cover (16). |
30
